Translate

Sunday, January 13, 2013

FMQ Bonus Challenge is Bound

I have finished my FMQ KK Bonus quilt and I have had so much fun making this quilt as I tested out so many of the new techniques I learned on the internet.  Thank you Teri Lucas and Jeanne Sumaltro for the KK tutorials on how to turn my photos into a kaleidoscope in the shape of a pinwheel.  Thanks Ricky Tims for the Grand Finale DVD access, I tried some of your trapunto techniques on the pinwheel and feathers around it.  This was a playtime learning quilt.  Thanks SewCalGal for the FMQChallenge!

In this first photo I had FMQ the feather border in Rayon green thread using techniques I learned from Patsy Thompson in our FMQ December tutorial.  Love how symmetrical it looks and the only mark I had to create was the spine of half of one border, and that one pattern was later was used to complete the feathers on the whole quilt border.  I used a soap sliver for marking just the spine which meant NO MARKS TO FUSS WITH REMOVING.   LOVE THIS PART.

In this photo I was trying to decide which thread would look best for high contrasting hyper feathers!  Cindy Needham had showed me this trick about just unwinding thread right on your project!  The thread colors are always lighter off the spool so choose a color one or two shades darker than you might think you want.


This photo shows half the quilt in green feathers, while half is hyperquilted !   What a difference.  To cut down on the thread build up in the spine, I first did the hyper quilted plume, and then filled with the swirl inside before hyperquilting the next plume.   Love the look and not too much threadplay on the spine.


In this photo you can see the entire border is hyperquilted...  next step is the threadpainting and scribbling in each pinwheel.


I made two of the pinwheel blades go outside the first border using a green fabric similar to what was in the photo.  I then shadowed the grass behind each person on each blade making the people in the trapunto area pop right up!  I then did some threadpainting I learned from Nancy Prince on TQS and then followed up with some dense scribbling.  In the very center I attached a button and bead connecting all the spokes of the pinwheel together.


In this photo you see a closeup of the feather border, but also note the couching in the binding.  This was a technique I learned from Libby Lehman in a special DVD she had on the TQS show this fall.  I loved trying this out.  You attach the binding from the front, then fold and press in place and then she had some great techniques for working with the couching, and as you zigzagged over it to hold the couched thread in place, it also stitched the back of your binding AT THE SAME TIME.  No handstitching!  I also chose to use a black thread to couch with, as I like how it gave the thread some texture, and it also toned down this orange color!  I used a great technique I learned from Leah Day on how to attach the ends of your binding.  It works great and closes the ends on the diagonal, no bulk in the seam.

You can read more about this quilt at  http://cantstopstitchin.blogspot.com/2013/01/fmqc-bonus-tutorial-kk-dvd-teri-lucas.html

Godspeed,
mary

Thursday, January 10, 2013

FMQC Bonus Tutorial, KK DVD, Teri Lucas

FMQC Bonus Tutorial in December using the KK program!

Great tutorial for the December Bonus class with Teri Lucas.  It was exactly what I needed to finally open my KK3 DVD I ordered last year, and not onlydid I finally register the DVD, but I actually upload a family photo and made a Kaleidoscope to put feathers on for this challenge.


Here you see my pinwheel created from a photo of  me, AKA ~ Mimi and Grampa ~ with our two grandsons, ages one and two, taken at the end of summer.  Oh, what a blast being a grandparent to our wee ones is for us!  Love you boys.

Once our photo was uploaded and cropped to fit the pinwheel pattern (chose a pinwheel shape because our grandsons LOVE playing with pinwheels at Mimi and Grampa's house), I printed it on washed 100 percent white cotton pressed to freezer paper with a hot dry iron, and put it through our laser printer.  I would have used the inkjet printer, however, I purchased bubble jet rinse by mistake, should have gotten Bubble Jet wash solution.   Anyway, used the laser, then ironed with HOT dry iron, removed paper, and I was ready to begin.
Once I had my pinwheel shape and size printed out, and my borders attached to the printed piece, I drew out the pinwheel and then drafted some stitches I might like to use, along with some ideas on what to quilt 1st, 2nd, etc.

I stitched on the borders after having used my colorwheel to help choose fabric colors that would go well with those colors in our photo, the trick is using the correct value of color.  Then I stitched using variagated rayon thread the extra batt for trapunto around the pinwheel area and the first row of feathers.  Once completed, I cut away the remaining batt, like a cookie cutter cuts away the extra dough.  Then layered my quilt top, batt and backing,  and stitched in the ditch to secure the quilt.

Next, I added a second row of feathers and filler inside the first row of feathers, with dark purple rayon thread.  I even stitched the pie shaped pinwheels again, which are now pretty puffy with the trapunto work, and raised nicely off of the quilt top.  I then did two rows of echo quilting around the feathers on the pinwheel, before beginning the stippling.  I may add another row of stitching around each family member in each of the pie shapes on the pinwheel ~ haven't yet decided on that for sure.  Here you can see the back of the quilt


I chose the final black border, as this quilt will hang on our family photo wall, in which all the photos are in black frames.   Once I am sure all the stitching is done, I will put a protective finish over the photo printed part of the quilt.

To protect the photo ink from running and fading, I first tried a few different products I had on hand at our home.  Two were iron-on  laminates, both were high gloss.  The pellon iron-on did not hold up to hand washing, while the Heat n Bond surface held up to washing, it would leave the quilt with too shiny a surface.   The other two products were paint on items.  One was a clear varnish, which made the fabric stiff when dry; it did not hold up to hand washing, and the ink faded along with the varnish as it dried.  The final product I tried, Americana Fabric Medium, not only gave the fabric a nice drape when dry, but it held up to the washing, and it appeared to dry without fading or washing away the ink.  That will be what I will apply to my quilt top prior to hanging on display.

Lots of fun doing this bonus challenge, and nowthat I have done one, I have so many ideas for future KK projects. Cindy Needhams E-book updates she mailed out today, had some great tips for completing the quilting while the tutorial by Teri Lucas had great tips and inspiration for finaling opening and using the KK3 DVD I bought a while back.

Thank you again Sew Cal Gal ~ it sure has been a lot of fun participating in the FMQ Challenge.
* To see how this quilt finished, go to
http://cantstopstitchin.blogspot.com/2013/01/fmq-bonus-challenge-is-bound.html

Godspeed,
mary